Description
$6,000 Dodge Demon / Hellcat Redeye 2.7L Ported Supercharger by SDG Motorsports – 108mm Kong Throttle Body and GripTec Pulley
Hellcat Redeye Ported Supercharger. Upgrade your supercharged Dodge performance build with this 2.7L Dodge Demon / Hellcat Redeye ported supercharger, professionally modified by SDG Motorsports. This high-performance supercharger assembly features extensive porting upgrades, a Hellephant-style ported snout, an X-Treme billet bearing plate, and upgraded supporting components. Hellcat Redeye Ported Supercharger | Quality cars parts
The supercharger has approximately 200 miles of use and comes with a 108mm Kong throttle body, 2.65-inch GripTec pulley, and supercharger lid.
According to the seller, the blower produced more than 1,100 wheel horsepower at approximately 25 PSI of boost, using a stock lower pulley. These figures represent reported results from a particular engine configuration, not guaranteed performance on another vehicle. Hellcat Redeye Ported Supercharger | Quality cars parts
The asking price is $6,000 firm.
For buyers searching for a Dodge Demon Redeye 2.7L ported supercharger for sale, this assembly offers a modified forced-induction setup with several performance-oriented components.
Hellcat Redeye Ported Supercharger
Technical Specifications
Product Name: SDG Motorsports Ported Dodge Demon / Hellcat Redeye Supercharger
Asking Price: $6,000 Firm
Supercharger Displacement: 2.7 Liters
Original Application: Dodge Demon / Hellcat Redeye Platform
Supercharger Type: Positive-Displacement, Twin-Screw-Style Application Not Independently Verified
Porting Company: SDG Motorsports
Snout: SDG Hellephant Ported Killer Snout
Bearing Plate: SDG X-Treme Billet Bearing Plate
Bearings: New Bearings Installed
Supercharger Oil: New Oil Added
Throttle Body: Kong 108mm
Upper Pulley: 2.65-Inch GripTec
Lower Pulley Used During Reported Performance: Stock Lower Pulley
Reported Boost Pressure: Approximately 25 PSI
Reported Power Output: Over 1,100 WHP
Reported Mileage: Approximately 200 Miles
Supercharger Lid: Included
Condition: Used, Modified, Low Reported Mileage
Manufacturer Part Number: Not Provided
Exact Vehicle Fitment: Requires Verification
Installation Hardware: Not Specified
ECU Calibration: Not Included or Confirmed
Price Negotiability: Firm
Hellcat Redeye Ported Supercharger
SDG Motorsports Ported 2.7L Supercharger
The 2.7L supercharger platform is associated with high-performance Dodge applications, including the Challenger SRT Demon and Hellcat Redeye.
These vehicles use forced induction to deliver substantial engine power.
A supercharger compresses incoming air before it enters the engine, increasing the amount of air available for combustion.
Porting modifications alter selected internal airflow passages to reduce restrictions and support improved airflow characteristics.
This assembly has undergone porting work by SDG Motorsports.
The seller identifies several modifications, including a Hellephant-style snout and billet bearing plate.
These components distinguish the blower from an unmodified factory assembly.
Hellcat Redeye Ported Supercharger
SDG Hellephant Ported Killer Snout
The supercharger includes an SDG Hellephant ported Killer snout.
The snout forms part of the supercharger’s inlet and drive assembly.
In modified forced-induction applications, inlet airflow can influence overall system performance.
Porting work may change the internal passage geometry to support airflow through the inlet.
The seller specifically identifies this component as an SDG Hellephant ported Killer snout.
Its exact internal dimensions and porting specifications have not been provided.
Therefore, no individual airflow gain or horsepower increase is attributed solely to the snout.
The modification forms part of the overall supercharger configuration.
Hellcat Redeye Ported Supercharger
SDG X-Treme Billet Bearing Plate
An SDG X-Treme billet bearing plate is also included in the modified supercharger assembly.
Bearing plates support important rotating components within a supercharger.
Their design and manufacturing tolerances influence mechanical alignment and component support.
Billet construction generally refers to a part machined from solid material stock.
The seller identifies the installed plate as an SDG X-Treme billet component.
Its exact alloy, dimensions, and engineering specifications have not been supplied.
The bearing plate is included as part of the assembled blower.
Hellcat Redeye Ported Supercharger
New Supercharger Bearings
The seller reports that new bearings have been installed.
Bearings are important components within a supercharger’s rotating assembly.
They support rotating shafts and help maintain controlled movement.
The condition and installation of these components can influence mechanical operation.
The supplied description confirms new bearings but does not identify their manufacturer or specifications.
It also does not include documentation of the installation procedure.
The bearings form part of the advertised supercharger modifications.
Hellcat Redeye Ported Supercharger
New Supercharger Oil
The supercharger has also received new oil.
Supercharger oil provides lubrication for designated internal components.
The correct lubricant and quantity depend on the supercharger’s design.
The seller reports that new oil was added during the work performed on the assembly.
The lubricant brand and service date have not been specified.
This maintenance detail accompanies the new bearing installation and other modifications.
Hellcat Redeye Ported Supercharger
Kong 108mm Throttle Body Included
The package includes a 108mm Kong throttle body.
A throttle body controls airflow entering the engine’s intake system.
High-performance throttle bodies are commonly used in modified forced-induction applications.
The advertised 108mm size identifies the throttle body’s nominal opening dimension.
Its suitability depends on the inlet arrangement, electronics, and engine calibration.
The included Kong throttle body complements the ported supercharger configuration.
However, the listing does not specify the throttle body’s exact model or electronic connector arrangement.
No separate horsepower gain is claimed for the throttle body alone.
Hellcat Redeye Ported Supercharger
2.65-Inch GripTec Supercharger Pulley
The supercharger includes a 2.65-inch GripTec upper pulley.
Pulley sizing affects the relationship between engine speed and supercharger rotational speed.
Changing pulley dimensions can influence boost pressure and operating characteristics.
GripTec pulleys are associated with high-performance supercharger drive applications.
The seller identifies the installed upper pulley as a 2.65-inch GripTec unit.
Its exact part number and belt compatibility have not been supplied.
The reported performance figures were achieved using a stock lower pulley.
That distinction matters when comparing the configuration with other modified Dodge supercharger systems.
Hellcat Redeye Ported Supercharger
Reported 1,100+ Wheel Horsepower Performance
According to the seller, this supercharger helped produce more than 1,100 wheel horsepower.
The reported setup operated at approximately 25 PSI of boost.
The seller also states that the engine used a stock lower pulley during that performance result.
Wheel horsepower refers to power measured at the driven wheels rather than directly at the engine crankshaft.
Actual output depends on numerous factors beyond the supercharger.
These include engine modifications, fuel selection, calibration, exhaust configuration, operating conditions, and drivetrain characteristics. Hellcat Redeye Ported Supercharger | Quality cars parts
The supplied information does not include a dyno sheet or complete engine build specification.
Accordingly, 1,100+ WHP is a seller-reported result, not a guaranteed output for another installation.
Hellcat Redeye Ported Supercharger
Approximately 25 PSI of Reported Boost
The seller reports approximately 25 pounds per square inch of boost pressure.
Boost pressure measures intake manifold pressure above atmospheric pressure.
Supercharger pulley combinations can influence the amount of boost generated.
However, boost pressure also depends on engine airflow characteristics and operating conditions.
The advertised result was obtained using the described supercharger configuration and a stock lower pulley.
The exact engine modifications and measurement conditions have not been provided.
Another vehicle may produce different boost pressure with the same supercharger.
The reported 25 PSI figure should therefore be understood as a historical performance reference.
Hellcat Redeye Ported Supercharger
Approximately 200 Miles on the Blower
The seller reports approximately 200 miles of use on the supercharger.
This is relatively limited reported mileage for a used performance component.
However, mileage alone does not establish the mechanical condition of a modified supercharger.
Operating conditions, rotational speed, boost levels, and previous maintenance also influence component wear.
The listing identifies the blower as having approximately 200 miles.
It does not specify whether this mileage was accumulated entirely after the porting and bearing work.
The exact service timeline remains unconfirmed.
Hellcat Redeye Ported Supercharger
Supercharger Lid Included
The supercharger comes with its lid.
The lid forms part of the upper supercharger assembly.
Its configuration can affect packaging and compatibility with the intended intake system.
Including the lid may be useful for buyers sourcing a complete blower assembly.
However, the exact lid design, finish, and part number have not been provided.
The listing also does not confirm whether additional gaskets, sensors, hoses, or mounting hardware accompany the supercharger. Hellcat Redeye Ported Supercharger | Quality cars parts
The confirmed included component is the supercharger lid.
Hellcat Redeye Ported Supercharger
Dodge Demon and Hellcat Redeye Applications
The 2.7L supercharger platform is associated with Dodge’s high-output supercharged V8 applications.
The Dodge Challenger SRT Demon and Hellcat Redeye are particularly relevant to this category.
These vehicles use specialized forced-induction systems designed around their respective engine configurations.
The advertised assembly is identified as a Demon / Redeye 2.7L supercharger.
However, the exact donor vehicle and manufacturer part number have not been supplied.
Compatibility with a particular Dodge model depends on its engine, intake arrangement, accessories, and electronic systems.
The listing does not establish universal bolt-on fitment across all supercharged Dodge vehicles.
Hellcat Redeye Ported Supercharger
Dodge Challenger SRT Performance Builds
The Dodge Challenger is a popular platform for high-performance engine modifications.
Supercharged Challenger variants include several different factory powertrain configurations.
Owners may consider larger or modified superchargers when planning extensive engine upgrades.
This SDG Motorsports ported 2.7L blower may interest builders working with compatible Challenger applications.
Its ported snout, upgraded bearing plate, throttle body, and pulley form a performance-oriented combination.
However, the assembly’s exact installation requirements depend on the intended engine.
The listing does not confirm compatibility with every Challenger SRT trim.
Hellcat Redeye Ported Supercharger
Dodge Charger Hellcat Applications
The Dodge Charger SRT Hellcat is another well-known supercharged performance platform.
Certain Charger applications use different factory supercharger configurations than the Demon and Redeye.
A 2.7L supercharger conversion may require additional compatible components and calibration.
The supplied description includes Dodge Charger and Hellcat-related keywords.
However, that does not establish direct installation compatibility with every Charger Hellcat.
Buyers should distinguish the advertised Demon / Redeye supercharger platform from the receiving vehicle’s original equipment. Hellcat Redeye Ported Supercharger | Quality cars parts
No complete Charger conversion kit is included or confirmed.
Hellcat Redeye Ported Supercharger
Modified Supercharger for High-Horsepower Builds
This supercharger assembly is intended to appeal to enthusiasts pursuing high-output forced-induction performance.
The modifications include airflow-related porting and upgraded mechanical components.
The included throttle body and pulley also form part of the performance configuration.
These modifications may be relevant to a compatible high-horsepower engine build.
However, the blower’s reported performance cannot be separated from the rest of the engine setup.
Fuel delivery, cooling, engine internals, exhaust flow, and ECU calibration can all affect results.
The listing does not identify the full supporting modification package used during the reported 1,100+ WHP result.
Hellcat Redeye Ported Supercharger
Performance Tuning and Calibration
Modified supercharger systems can change engine airflow and boost characteristics.
These changes may require suitable engine management calibration.
The correct calibration depends on the complete vehicle configuration.
A larger throttle body, modified inlet, and pulley combination can influence airflow behavior.
The seller has not included or identified an ECU tune with the supercharger.
No particular fuel system, injector size, or calibration package is confirmed.
The offering is therefore a modified supercharger assembly rather than a complete tuned engine package.
Condition and Modification Summary
The supercharger is used and has approximately 200 reported miles.
It has received porting work from SDG Motorsports.
The seller identifies an SDG Hellephant ported Killer snout and an SDG X-Treme billet bearing plate.
New bearings and new oil are also reported.
The package includes a Kong 108mm throttle body, 2.65-inch GripTec pulley, and supercharger lid.
The exact cosmetic condition and any additional internal wear measurements have not been provided.
No warranty or formal inspection documentation is specified.
What’s Included in the Sale
The advertised $6,000 package includes:
- 2.7L Dodge Demon / Hellcat Redeye supercharger
- SDG Motorsports porting modifications
- SDG Hellephant ported Killer snout
- SDG X-Treme billet bearing plate
- Newly installed bearings
- New supercharger oil
- Kong 108mm throttle body
- 2.65-inch GripTec upper pulley
- Supercharger lid
Reported performance: More than 1,100 WHP at approximately 25 PSI of boost with a stock lower pulley.
Reported mileage: Approximately 200 miles.
Asking price: $6,000 firm.
Additional mounting hardware, belts, wiring, calibration equipment, and engine components are not confirmed as included.
Buy a Ported 2.7L Dodge Demon / Redeye Supercharger
This SDG Motorsports ported 2.7L supercharger offers a modified forced-induction assembly for compatible Dodge performance applications.
The package features an SDG Hellephant ported Killer snout, X-Treme billet bearing plate, new bearings, and fresh oil.
It also includes a Kong 108mm throttle body, 2.65-inch GripTec pulley, and supercharger lid.
With approximately 200 reported miles, the blower is offered as a low-mileage modified assembly.
The seller reports that it contributed to more than 1,100 wheel horsepower at approximately 25 PSI of boost.
Actual performance depends on the complete engine configuration.
For buyers searching for a ported Dodge Demon Redeye 2.7L supercharger with Kong throttle body and GripTec pulley, this package brings together several performance components.
Price: $6,000 firm.
Reviews
There are no reviews yet.